Assuming you would like a step by step guide on how to make finger puppets with gloves:
You will need:
-a pair of gloves
-scissors -felt or other fabric for the features of the puppet -needle and thread or hot glue gun and glue sticks
-buttons, beads, or other decorations (optional) 1. Cut the fingers off the gloves. If you are using knit gloves, be careful not to cut the thumb off as well.
You can fray the end of each finger to create a “tattered” look if you’d like.
- Start with a clean glove
- If the glove is new, you can skip this step
- Otherwise, wash the glove in warm water with mild detergent
- Allow it to air dry completely before moving on to the next step
- Cut off the fingers of the glove, leaving about an inch of fabric at the base of each finger
- Use a sharp knife or scissors to make a small slit in the center of each finger puppet
- This will be where your child inserts their finger to wear the puppet
- Decorate each puppet as desired using fabric markers, felt pieces, buttons, or other craft materials
How Do You Make a Glove Puppet Step by Step?
Assuming you would like a tutorial on how to make a glove puppet, here are the supplies you will need:
-a pair of gloves
-a hot glue gun and glue sticks
-scissors -fabric scraps or felt in various colors (for the features) -yarn or string (for the hair)
-buttons, sequins, or other small decorations (optional) 1. Begin by cutting out two ear shapes from your fabric scraps. If you are using felt, no need to hem the edges since they won’t fray.
If you are using another type of fabric, you will want to either serge or zigzag stitch around the edge of each shape to prevent fraying. Hot glue these onto the top front portion of each glove near the thumb area. 2. Cut out two oval eye shapes and two smaller oval shapes for pupils from your fabric scraps.
Again, if you are using felt there is no need to hem these pieces. Once again, if not using felt be sure to finish the edges before proceeding. Glue these pieces onto the face portion of each glove just below where the ears were glued on.
You can add buttons, sequins, or other small decorations for eyes if desired instead of making fabric eyes. 3. Cut a triangular nose shape from your fabric scrap pile and glue this onto one side of each glove just below where the eyes were glued on. 4 .
To make the mouth, cut a long thin strip of fabric about 1/2″ wide and long enough to reach across both gloves when stretched out straight . Fold this strip in half lengthwise and press with an iron . Open back up , then fold each long side towards center crease and press again . Next , fold along original center crease so that all four layers are now folded in half . Press well with iron . Using scissors , carefully fringe one end by making tiny cuts along entire length – do not cut through all layers !
How Do You Make Finger Puppets With Gloves?
Assuming you would like a tutorial on how to make finger puppets with gloves:
What you will need:
-A pair of clean gloves (preferably white)
-Scissors -Fabric markers or pens -Optional: yarn or ribbon, glue, googly eyes
Instructions: 1. Start by cutting the tips off the fingers of the glove. You can make these cuts as straight or as curved as you want.
Just be sure not to cut too close to the base of the fingers, or your puppet may be difficult to put on later. 2. Next, use your fabric markers or pens to draw a face onto each finger of the glove. Be creative!
You can give your puppets all sorts of expressions. If you’re using yarn or ribbon, this is also the time to glue or tie it around the base of each finger for hair. Add googly eyes if desired.
3. That’s it! Your puppets are now ready to perform for an audience. Put them on and let your imagination run wild!
How is a Glove Puppet Made?
A glove puppet is a puppet that is worn on the hand, with the fingers being used to operate the mouth and head of the puppet. Glove puppets are usually made from cloth or felt, and can be decorated with paint, yarn, or sequins.
To make a glove puppet, first trace your hand onto a piece of paper.
Cut out the paper template and use it to cut two pieces of fabric or felt. Sew the two pieces together along the traced lines, leaving an opening for your hand. Decorate the front of the puppet as desired, then insert your hand into the opening.
Use your fingers to move the mouth and head of the puppet.
How Do You Make a Simple Finger Puppet?
Assuming you would like a step-by-step guide on how to make a simple finger puppet:
You will need:
-a sheet of felt in any color (you can also use an old sock)
-scissors -needle and thread or a hot glue gun and glue sticks -optional: googly eyes, pom poms, yarn, pipe cleaners, etc. to decorate your puppet
Instructions: 1. Cut two equal oval shapes out of the felt. These will be the top and bottom halves of your puppet’s head.
If you are using an old sock, simply cut off the toe part to create a cylinder shape. 2. Place the two ovals together and sew or glue them along the curved edge, leaving the straight edge open. This is now the back of your puppet’s head.
If you are using a hot glue gun, be very careful not to burn yourself! You can also ask an adult for help with this step. 3. Decorate your puppet’s face however you like!
Glue on googly eyes, add yarn hair, give them a big smile with embroidery thread…be creative! Once you’re happy with your design, it’s time to move on to the body. 4. For the body, cut out a small rectangle of felt (or fabric if you’re using an old sock).
Fold it in half lengthwise and sew or glue along the side edges and bottom edge, leaving the top open. 5. Turn your tube right side out so that the seam is now inside. Slide it over your finger until it sits snugly at the base of your palm – this is where it will stay during performances! Finger puppets are usually quite small so that they fit comfortably on one hand without obscuring too much view for audiences members behind them . . . but feel free to make yours any size you like! 6And there you have it – one simple finger puppet ready for hours of imaginative play!
How to make a sock puppet Girl – Ana | DIY Crafts
How to Make Finger Puppets With Paper Step by Step
Making your own finger puppets is a fun and easy project that you can do with the kids. All you need is some paper, scissors, and glue. Follow these simple steps to make your own finger puppets.
1. Start by cutting out a basic shape for your puppet. It can be anything from a animal to a character from their favorite book. 2. Once you have your basic shape cut out, start adding details like eyes, noses, mouths, etc.
3. Once all the details are added, it’s time to glue everything together. Just put a small amount of glue on each piece and assemble your puppet on your finger. 4. That’s it!
Your Puppet is now ready to play with. Have fun putting on shows for all your friends and family!
How to Make Finger Puppets With Felt
Making your own finger puppets is a great way to entertain kids and adults alike! And what’s even better is that they’re super easy and inexpensive to make. All you need is some felt, a hot glue gun, and some imagination.
Start by sketching out your puppet designs on paper. Once you have a good idea of what you want your puppets to look like, cut them out of felt. Make sure the pieces are small enough to fit comfortably on your fingers.
Now it’s time to start assembling your puppets! Use hot glue to attach the different parts together. Be creative – there’s no wrong way to do this!
Once your puppets are all assembled, have fun putting on shows for your friends and family!
How to Make Finger Puppets Family
Making finger puppets is a great way to entertain your family and friends. You can make them as simple or as detailed as you like. All you need is some fabric, stuffing, and a few other materials.
To make a basic finger puppet, start by cutting a rectangle of fabric that is twice the length of your desired puppet plus 1 inch. Fold the fabric in half lengthwise and sew the long sides together with a sewing machine or needle and thread. Turn the tube of fabric right side out and stuff it with stuffing.
Next, cut two small circles out of felt for the eyes and glue them in place. You can also add details like a mouth, nose, or eyebrows with more felt or embroidery floss. Finally, glue or stitch on some ribbon loops at either end of the puppet so that it can slide onto your fingers.
With just a little bit of time and effort, you can create all sorts of fun finger puppets for your next family gathering!
How to Make Finger Puppets With Cloth
Looking for a fun and easy project to do with the kids? Finger puppets are the perfect solution! And what’s even better is that you can make them using items you probably already have around the house.
Here’s how to make finger puppets with cloth: 1. Cut a rectangle of fabric that is about 6 inches wide by 9 inches long. Fold the fabric in half lengthwise so that it is now 3 inches wide by 9 inches long.
2. Sew along the 3-inch side, leaving a 1/4-inch seam allowance. Turn the fabric right side out and press flat. 3. Cut two rectangles of felt that are 2 inches wide by 4 inches long.
These will be used for the puppet’s arms. 4. Place one felt rectangle on each side of the puppet body, aligning the top edges. Sew along the top edge, again leaving a 1/4-inch seam allowance.
Trim any excess felt from the bottom edge if necessary. 5. To make the head, cut a small circle of felt (or use a pre-cut felt circle). Center it on top of the puppet body and sew in place using a whip stitch or running stitch around the outside edge.
How to Make a Hand Puppet With a Moving Mouth
Making a hand puppet with a moving mouth is easy and only requires a few supplies. All you need is some fabric, stuffing, thread, and a needle. Once you have your supplies, follow these steps:
1. Cut two pieces of fabric in the shape of a hand puppet. Make sure the fabric is large enough to fit over your hand. 2. Place the two pieces of fabric together and sew them along the edges, leaving an opening at the bottom for stuffing.
3. Stuff the fabric puppet with stuffing until it is firm. Then stitch the opening closed. 4. To make the mouth move, sew a piece of string or ribbon onto each side of the mouth area.
Then tie the strings together so that when you pull on one string, the other string moves too (this will make the mouth open and close).
Finger Puppets Diy Printable
Finger puppets are a great way to entertain kids! They’re easy and fun to make, and you can use them to tell all kinds of stories. Plus, they’re super portable, so you can take them with you wherever you go.
If you’re looking for a fun project to do with the kids, why not try making some finger puppets? You can find printable templates online that make it easy to get started. Just print out the template, cut out the puppet parts, and glue or tape them together.
Then let your little ones decorate their new friends however they want! Once you’ve got your puppets all made, it’s time to start putting on shows. You can use finger puppets to tell all sorts of stories.
If you need some inspiration, there are plenty of resources online that offer scripts for finger puppet shows. Or you can make up your own tales! Just have fun and be creative.
Finger puppets are a great way to keep kids entertained. They’re easy and fun to make, and they offer endless possibilities for storytelling. So get crafting and enjoy putting on some amazing shows!
Making finger puppets out of gloves is a fun and easy project that kids will love. It’s also a great way to recycle old gloves that are no longer being used. Here’s a step by step guide on how to make them:
1. Start by cutting the fingers off of an old glove. You can use scissors or a knife for this. 2. Next, cut a small hole in the palm of the glove.
This will be where your child’s finger goes when they’re using the puppet. 3. Once you’ve cut the holes, it’s time to decorate your puppets! You can use fabric markers, paint, or anything else you have around the house.
Get creative! 4. Once they’re all decorated, slip them onto your child’s fingers and let the fun begin!